
About Our Auto Collision Shop in Firebaugh
We repair collision damage with an eye on how your car will hold up years from now, not only how it looks the day you pick it up. That means sealing what we cut, protecting what we weld and telling you plainly what we found.

How We Think About a Repair
A collision repair can look finished and still be unfinished. Bare steel left under a seam, a bumper cover clipped onto a broken tab, a blended panel with thin clear coat. Each one passes a quick look at pickup, then shows up months later as rust, a rattle or peeling paint. We build our process around stopping those slow failures before they start.
So we take the car apart far enough to see the hidden damage. Behind a crumpled bumper cover there is usually a foam energy absorber, a reinforcement bar and mounting brackets, and sometimes a bent radiator support. We write the estimate from what we actually find, take photos of it, and call you before anything in the plan changes.
Our work covers collision repair, dent repair, paint and refinishing, bumper repair and frame straightening, and we help you through insurance claims. Every one of those jobs is a chance to put your vehicle back in a condition that will age well. That is the test we use to decide when a car is ready to go home.
What We Do on Every Car
- 01
Corrosion protection where we cut or weld
Welding and sectioning burn off the factory zinc coating and e-coat. We restore protection with weld-through primer at the joint and cavity wax inside closed panels, so rust does not start from the inside where nobody looks.
- 02
Paint applied to last in strong sun
Valley summers are hard on clear coat. We lay down base and clear at proper film thickness and let the finish cure before we sand and polish. Rushed or thin clear is what fades and lifts early.
- 03
Structure that is measured, not eyeballed
If the frame or unibody took a hit, we measure it against the manufacturer's dimensions before and after pulling. Correct geometry keeps tires wearing evenly, keeps the alignment holding and lets doors and the hood close the way they did new.
- 04
Straight answers on repair versus replace
A dent with unbroken paint can often be worked out without refinishing, which keeps the original factory finish. When a panel is stretched or a bumper cover is cracked through a mounting point, we tell you it will not hold and explain why.
Drivers We Work With
Our shop is in Firebaugh, and you bring your car to us for the repair. Drivers come in from Mendota, Dos Palos, Kerman, Los Banos, Chowchilla, Madera, Madera Acres, San Joaquin and Parksdale. Farm roads, gravel chips and long highway miles all leave their marks, and we repair plenty of each. The Service Areas page has more on the towns around us.
- Firebaugh
- Mendota
- Dos Palos
- Madera
- Chowchilla
- Los Banos
- Kerman
- Madera Acres
- San Joaquin
- Parksdale

Bring Us the Damage, We Will Explain It
Tell us what happened and what you see on the car. We will set a time for you to bring it in, look it over and walk you through the repair and the estimate.