
Firebaugh Auto Collision Shop for Repairs That Last
We are an auto collision shop that fixes your car and protects it for the miles ahead. We handle collision repair, dent repair, paint and refinishing, bumper repair and frame straightening, and we help with the insurance claim. Drivers bring their cars to us from Firebaugh, Mendota, Dos Palos and nearby towns.
- I-CAR Platinum certified
- Written line-item estimates
- Corrosion protection restored
- Photos of hidden damage
Auto Body Services We Handle
Our technicians are I-CAR Platinum certified, so the repair follows current training on modern steel, aluminum and the sensors built into today's bumpers. We do collision repair, dent repair, paint and refinishing, bumper repair and frame straightening in our own shop. When an insurance company is involved, we document the damage and work with the adjuster on the claim. Open any service below to read the typical causes of that damage, the steps we take to correct it and the factors that set its price.

Collision Repair
Structural, panel and refinish work after a crash, with sealers and corrosion protection put back so the repair holds up for years.

Dent Repair
Paintless removal for dings with intact paint, and metal work plus refinishing for creased or cracked panels, so a small dent never turns into rust.
Paint and Refinishing
Color matching, clearcoat repair and panel refinishing that stops fading and peeling before the damage reaches the metal.
Bumper Repair
We weld torn plastic, rebuild broken mounting tabs, and refinish scuffed bumper covers so the original part stays on your car.
Frame Straightening
We measure your vehicle's structure against factory dimensions, pull bent rails and aprons back into spec, and replace what cannot be safely straightened.
Insurance Claims
We document hidden damage, write a line-item estimate and send supplements to your insurer, so the claim pays for the repair your car actually needs.
Towns We Work With Near Firebaugh
Every repair happens at our Firebaugh shop, and plenty of the cars and trucks in our bays come from nearby. We regularly see vehicles from Mendota, Dos Palos, Kerman, San Joaquin and Los Banos. Owners from Madera, Madera Acres, Parksdale and Chowchilla make the trip too.
- Firebaugh
- Mendota
- Dos Palos
- Madera
- Chowchilla
- Los Banos
- Kerman
- Madera Acres
- San Joaquin
- Parksdale
Driving in from farther out? Give us a ring before you come so we can hear about the damage and make sure the inspection visit is worth the miles.
How We Fix Cars to Last
A dent can look gone while the metal behind it is starting to rust. We repair the parts you see and restore the protection you don't, so the fix holds up years from now.
We restore what the factory put there
Collision damage cracks e-coat, seam sealer and cavity wax. We replace them on every panel we open, because bare steel inside a door or quarter panel rusts from the inside out.
We look behind the panel
Before we write the final estimate, we remove the bumper cover or trim where damage may hide. Bent reinforcement bars, cracked brackets and pushed-in radiator supports show up on the estimate, with photos.
Repair when it will last, replace when it won't
A panel with a clean dent can often be straightened and keep its original factory corrosion coating. A stretched or kinked panel cannot. We tell you which one you have and why.
Paint built for long sun
We match color with a spectrophotometer and spray-out cards, then apply a full clearcoat layer with UV protection. Thin clearcoat is what peels first on a car parked outside through a Central Valley summer.
Line-item estimates you can read
Every part, labor operation and paint step is listed separately. If we find more damage once the car is apart, we show you and explain it before that work goes ahead.
What Moves the Price of a Repair
No two collisions cost the same, even on the same model. The price depends on what was hit, what it's made of and what sits behind it. Here is what we look at when we write the estimate.
We build the estimate after looking at your car, with each item listed and explained. If we find more once the car is apart, we document it and talk with you, and with your insurer if there is a claim, before going further.
- Hidden structural damage
- A bumper cover may be fine while the impact absorber and reinforcement bar behind it are crushed. Frame rails and unibody sections that need measuring and pulling add labor and equipment time.
- Panel material
- Aluminum hoods, fenders and truck beds need separate tools and a clean work area to avoid contamination. High-strength steel parts often have to be replaced instead of straightened, per the manufacturer.
- Parts choice
- Factory parts, aftermarket parts and quality used parts differ in price and fit. We note which ones your insurance policy allows and what that means for the fit and the finish.
- Paint and blending
- Tri-coat pearls and some metallics need extra coats and blending into the panels next to the repair so the color matches in daylight. More panels blended means more material and time.
- Sensors and calibration
- Cameras and radar behind bumpers and windshields may need calibration after a repair. That step depends on your vehicle and what was moved or replaced.

About Our Shop
Auto Collision Shop Firebaugh is a body shop for drivers who plan to keep their cars. Most people we see want the same thing: the damage gone, the car safe and no rust bubbling through the repair two winters later. That is the work we set up our shop to do.
We explain the repair in specific terms. If a fender can be straightened, we say so. If a crumple zone was crushed and has to be replaced to absorb the next impact properly, we show you where and why. You leave knowing what is under the paint.
- Certifications
- I-CAR Platinum certified
Questions Drivers Ask Us
Can I choose your shop if my insurance company recommends another one?
Yes. In California, your insurer cannot require you to use a particular body shop. You can bring your car to us and we will work with your adjuster on the claim, sending photos and a line-item estimate.
Do I have to file an insurance claim for a small repair?
No. For a minor dent or a scuffed bumper, some drivers choose to pay directly instead of filing. We can write the estimate first so you can compare the repair cost with your deductible before you decide.
Will the new paint match the rest of my car?
We read your factory paint code, measure the color with a spectrophotometer and spray test cards before painting the car. When a color needs it, we blend into the panels next to the repair so the transition doesn't show in sunlight.
How long will the repair take?
That depends on the damage, parts availability and whether there is an insurance claim. Small dent or bumper work is quicker than structural repair that needs measuring and pulling. We give you an expected timeline with the estimate and let you know if a parts delay changes it.
Is my car safe to drive after a minor collision?
Sometimes, but not always. A small hit can bend a tie rod, crack a headlamp mount or knock a radar sensor out of aim. If the car pulls, a warning light comes on or the tires rub, have it looked at before driving any distance.
Do you use factory parts or aftermarket parts?
It depends on your vehicle, your insurance policy and the part. We list the type of every part on the estimate. Structural and safety parts are where we push hardest for factory fit.
Why should I fix a small dent or scratch now?
A chip or crease that breaks the paint exposes bare metal. Moisture works under the edges and rust spreads beneath the clearcoat, which turns a small repair into a panel replacement. Fixing it early keeps the original panel and its factory protection.
How a Repair Runs at Our Shop
You bring your car in and we keep you posted until you drive it home.
- 1
Phone call and drop-off
Tell us what happened and what you see. We set a time for you to bring your vehicle in for inspection.
- 2
Inspection and written estimate
We photograph the damage, check panel gaps and look under trim where needed. You get a line-item estimate, and if there is an insurance claim, we send the same documentation to the adjuster.
- 3
Structure, body and corrosion work
We measure and straighten the frame or unibody if needed, then repair or replace panels. Before paint, we restore primer, seam sealer and cavity wax on every repaired area.
- 4
Paint and reassembly
Color is matched and sprayed in our booth, then cured. We reinstall trim, check that the lights and sensors work, and road test the car.
- 5
Pickup and walkthrough
We show you what was done, including photos of the work behind the panels, and point out anything worth watching in the months ahead.

Keep Your Car Sound for the Miles Ahead
Tell us what happened and we will set up a time to inspect your vehicle and walk you through the repair.